Current location:Home > News
Deep Groove Ball Bearing
Time:2019-04-09  viewing count:326

Deep groove ball bearing is the most common type of rolling bearing. The basic deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of retainers. The type code of deep groove ball bearing is 6. 


Deep groove ball bearings are mainly used to bear pure radial load, but also can bear both radial load and axial load. When it only bears pure radial load, the contact angle is zero. When the deep groove ball bearing has a larger radial clearance, it has the performance of angular contact bearing and can bear a larger axial load. The friction coefficient of deep groove ball bearings is very small and the ultimate speed is very high. Especially in the high-speed operation with large axial load, deep groove ball bearings have more advantages than thrust ball bearings.

Deep groove ball bearings are simple in structure and easy to achieve higher manufacturing accuracy compared with other types, so they are easy to be produced in series and in large quantities with lower manufacturing cost and are widely used. In addition to the basic type, deep groove ball bearings also have various variant structures, such as: deep groove ball bearings with dust cover; deep groove ball bearings with rubber sealing rings; deep groove ball bearings with stop grooves: deep groove ball bearings with large load capacity with ball notches; double row deep groove ball bearings. Today's article mainly introduces the first three types of bearings.

(1) Deep groove ball bearing with dust cover

Standard deep groove ball bearings with dustproof cover have two types: Z type and 2Z type, Z type with dustproof cover on one side and 2Z type with dustproof cover on both sides. 

(2) Deep groove ball bearings with sealing rings

Standard deep groove ball bearings with sealed circles have contact sealing bearings RS (one side seal), 2RS (two sides seal) and non-contact sealing bearings RZ (one side seal) and 2RZ (two sides seal). 

The performance, grease filling and application of bearings with sealing rings are basically the same as those of bearings with dust cover. The difference is that there is a large gap between the dust cover and the inner ring of bearings with dust cover, but the gap between the seal and the inner ring of non-contact seal ring bearings is very small. There is no gap between the seal and the inner ring of contact seal diagram bearings. The sealing effect is good, but the friction increases.

For low-noise applications, 60 and 62 series of smaller size deep groove ball bearings are commonly used. Whether open type bearings, dustproof cover type bearings or bearing with sealed ring type bearings, low noise and low vibration requirements can be put forward when ordering. In China mechanical industry standard stipulate V,V2,V3 Vibration Values of Low, Medium and High Vibration Levels.

(3) Deep groove ball bearings with stop grooves and stop rings

Standard deep groove ball bearings with stop grooves are named as N, bearing with stop grooves and stop rings as NR, in addition to ZN. ZNR and other structural variants. 


In addition to bearing with deep groove ball bearing which can bear radial load, bearing with stop groove and stop ring can limit the axial displacement of bearing, simplify the axial structure of bearing seat and reduce the axial size.

Deep groove ball bearings with stop grooves and stop rings are normally used in the working parts of automobiles, tractors, etc. where the axial load is not large.

Ningbo Zhenhai Mingwei Bearing Co., Ltd. was established in 2011. Originally known as Ningbo Zhenhai Xiaoqiao Bearing Co., Ltd., it mainly manages Miniature bearings under 10mm. In order to improve the production conditions, prevent dust and oil from entering the bearing, causing friction and noise, our company invested in the establishment of dust-free production workshop, bearing production environment has been greatly improved. In recent years, our company has expanded the production categories, such as polyurethane bearings, polyurethane bearings with screw, plastic-coated bearings, plastic-coated bearings with screw, etc. Our company will continue to provide customers with quality products and services. 

Contact Us
Ningbo Zhenhai Mingwei Bearing Co.,Ltd
Add : No.777 West Zhongguan Road, Zhenhai District, Ningbo, Zhejiang Province, China 315200
Phone: +86 182 6295 3431
Website: www.alibearing.com
E-mail : lili@alibearing.com

Scan And Chat

Copyright ©2019 Ningbo Zhenhai Mingwei Bearing Co.,Ltd
Privacy Policy Terms and Conditions
Please leave a message to us
Please leave a message to us
  • *
  • *
  • *
  • *